Neue FC aus Frankreich .
Main features:
ATmega2560 (MultiWii and MegaPirateNG Firmware Supported)
Acc+Gyro: MPU6050 (a real progress for having a perfect stabilization)
Mag: HMC5883L (for “Heading hold”, “Carefree” and GPS functions)
Baro: MS5611 (for "ALT Hold", greater precision than BMP085 )
FTDI + USB port (5V FTDI integrated, save money on FTDI)
15 Digital I/O (Up to 8-axis motor output, tri, quad, hexa, octocopters supported, 2 servos output for 2-axis gimbal system, 1 servos output for camera trig)
12 Analog I/O (8 channel radio control system, 4 Analog I/O for extended devices)
3.3V and 5V I2C (for sensors like sonar, optical flow sensor board)
ISP/SPI
4 Serial ports (1 for PC/Mac connection, 1 for GPS module, 1 for telemetry module)
Lipo monitor (support 3S, 4S lipo or more)
Buzzer (low battery indicator, control feedback)
LED indicators (power LED, status LED, stable LED and alarm LED)
Match the standard of RoHS
45x45mm mounting holes（Hole diameter: 3mm）
GPS Board Features:
MediaTek MT3329 66 channel GPS chipset
High sensitivity: Up to -165dBm tracking
Position accuracy: < 3m
Maximum update rate: up to 10Hz
3D Fix blue LED indicator
Hot Start 1 second typical
Warm Start 33 seconds typical
Cold Start 35 seconds typical
Very low power consumption：25mA acquisition, 20mA tracking
Built-in rechargeable coin battery for RTC backup power to decrease Time To Fix after power reconnection
Built-in patch antenna for reduced size
Serial TTL Interface with default baud rate 115200 bps
NMEA and Binary protocol
Includes cable adapter
2 GPS connection modes(pluged onboard or use a cable)
firmware( 10Hz, 115200bps) loaded
Sales information:
Pre order at www.diymulticopter.com with a 10% discount
DIYmulticopter is a multirotor store on the border of France and Belgium for the development of high quality open source hardwares and retail of some RC components.
Free shipment to EU coutries and 6.5 euros to US
http://www.diymulticopter.com/product.php?id_product=70
Main features:
ATmega2560 (MultiWii and MegaPirateNG Firmware Supported)
Acc+Gyro: MPU6050 (a real progress for having a perfect stabilization)
Mag: HMC5883L (for “Heading hold”, “Carefree” and GPS functions)
Baro: MS5611 (for "ALT Hold", greater precision than BMP085 )
FTDI + USB port (5V FTDI integrated, save money on FTDI)
15 Digital I/O (Up to 8-axis motor output, tri, quad, hexa, octocopters supported, 2 servos output for 2-axis gimbal system, 1 servos output for camera trig)
12 Analog I/O (8 channel radio control system, 4 Analog I/O for extended devices)
3.3V and 5V I2C (for sensors like sonar, optical flow sensor board)
ISP/SPI
4 Serial ports (1 for PC/Mac connection, 1 for GPS module, 1 for telemetry module)
Lipo monitor (support 3S, 4S lipo or more)
Buzzer (low battery indicator, control feedback)
LED indicators (power LED, status LED, stable LED and alarm LED)
Match the standard of RoHS
45x45mm mounting holes（Hole diameter: 3mm）
GPS Board Features:
MediaTek MT3329 66 channel GPS chipset
High sensitivity: Up to -165dBm tracking
Position accuracy: < 3m
Maximum update rate: up to 10Hz
3D Fix blue LED indicator
Hot Start 1 second typical
Warm Start 33 seconds typical
Cold Start 35 seconds typical
Very low power consumption：25mA acquisition, 20mA tracking
Built-in rechargeable coin battery for RTC backup power to decrease Time To Fix after power reconnection
Built-in patch antenna for reduced size
Serial TTL Interface with default baud rate 115200 bps
NMEA and Binary protocol
Includes cable adapter
2 GPS connection modes(pluged onboard or use a cable)
firmware( 10Hz, 115200bps) loaded
Sales information:
Pre order at www.diymulticopter.com with a 10% discount
DIYmulticopter is a multirotor store on the border of France and Belgium for the development of high quality open source hardwares and retail of some RC components.
Free shipment to EU coutries and 6.5 euros to US
http://www.diymulticopter.com/product.php?id_product=70
