; This is a configuration file for RunCam thumb. Each parameter is configured in the form of key=value.
; We recommend that you use notepad++ to view and edit this file. Download: https://notepad-plus-plus.org/download
; Note: To avoid typing errors, use copy-and-paste to fill in the value.
; Note: Inner product info, DO NOT EDIT!
[ProductInfoDoNotEdit]
FwVer=2.1.0
; Video settings
[Video]
; Resolution.
; Available values: [0]:1080p60fps; [1]:1080p50fps; [2]:1080p30fps;
; Default value: [0]
videoResolution=0
; Gcsv file:Please use a high-speed card above 64G and configure the video resolution to 1080p@50fps;
; Available values: [0]:OFF; [1]:ON;
; Default value: [0];
GCsv=0
; Loop recording interval.
; Available values: [0]:OFF; [1]:1 minute; [2]:3 minutes; [3]:5 minutes.
; Default value: [0]
LoopRecordingInterval=0
; Auto recording switch.
; Available values: [0]:OFF; [1]:ON.
; Default value: [0]
AutoRecording=0
; General settings
; Note: Brightness and exposure control settings are usually set to only one or the other.
[General]
; Exposure .
; Available values: [0:Lower]<---->[6:default]<---->[12:Higher]
; Default value: [6]
Exposure=6
; Brightness.
; Available values: [0:Lower]<---->[5:default]<---->[10:Higher]
; Default value: [5]
Brightness=5
; Sharpness.
; Available values: [1]:Lower, [2]:Low, [3]:default, [4]:High, [5]:Higher
; Default value: [3]
Sharpness=3
; Contrast.
; Available values: [1]:Lower, [2]:Low, [3]:default, [4]:High, [5]:Higher
; Default value: [3]
Contrast=3
; Saturation.
; Available values: [1]:Lower, [2]:Low, [3]:default, [4]:High, [5]:Higher
; Default value: [3]
Saturation=3
; White balance.
; Available values: [1]:Auto, [2]:Daylight, [3]:Cloudy, [4]:Tungsten
; Default value: [1]
WhiteBalance=1
; Power saving mode. [0]:OFF; [1]:1 minute; [3]:3 minutes;
; Available values: [0,1,3]
; Default value: [0]
PowerSavingMode=0