Hi, ich habe Albert von Microtechnics gefragt, ob sich an den neuen Anlagen etwas geändert hat, hier die Antworten:
>
> Hi, thank you for your email from yesterday.
> Before I made an order from my reservation, I have to know:
> 1. Are the gimbals from the new transmitter better as the from the first batch???
They look to be the same gimbals, probably just better quality control.
Problem was only due to some shafts ends which were slightly undersized.
Most gimbals from first batch were within tolerance and I had plenty of them with 0.0 or close to 0.0 on every axis. These ones had the correct sizing on every shaft.
They now better check every gimbal centering within limits ( 1 %)
I guess they also asked the manufacturer to better check their production.
I am also checking this particular point for every transmitter now before shipping, so you are sure to get gimbals within tolerance.
> 2. Has Frsky solved the problem with the noises (I mean noises without any activities.
No, that will be solved for the third batch, some do emit a very light noise, some other don't.
I check for this also and when the transmitter is too noisy I don't send it, these ones will be fixed later.
> 3. When is the lipo voltage monitor for smartport available?
No idea, I just received a shipping and it was not yet included.
Ich glaube es macht im Moment keinen Sinn, extra eine Anlage aus dem 2. Batch zu kaufen. Es gibt anscheinend keine Verbesserungen. Albert selektiert nur die Sender mit großen Abweichungen aus. Ich bin mit meiner Anlage ja auch zufrieden, keine Töne aus dem Lautsprecher und Abweichungen nur am Querruder von 0,2 - 0,3 %.